3D model of mustangdave
The models were repaired and checked for printability.
I made this from scratch using pictures as reference. I borrowed the worm gear model
...Show more from Johann517's Spider Rover and modified it slightly.
This is the famous killer metallic sphere from the 1979 cult movie classic "Phantasm". If you haven't seen this horror film, then you must be living underneath a rock. You will need to print out two blades. The sphere has pre-made slots you can stick the blades into. You might need to file or trim the slots to make a good fit. I was thinking about casting a life size aluminum version and polishing it to a mirror shine. You could also use chrome spray paint and some clear coat. I would recommend using support material just to be on the safe side.
I cut the bottom half with the drill into two pieces for easier printing. Just glue the two bottom pieces named bottom_a and bottom_b to make up the bottom portion of the sphere. I used Zatoichi's make where he split the bottom drill part into two pieces as inspiration. Thank you.
