3D model of terrain4print. The models were repaired and checked for printability.
This is the third piece from my Gothic Spaceship series. This time it is the nose
...Show more of the ship. It is fully compatible with previouse parts. You can easily build a spaceship wreck several feet long, starting with the nose and ending with engines.
If you have a really big print bed, there are a couple of versions to print this monster in one piece. If you have a smaller print bed, there are a couple of variations split up into three parts that clip together with my usual clip.
On the inside, you can see torpedo tube hatches and several instruments to control the ship. This makes perfect objective markers.
On the corner pieces, where the nose connects to the straight wall, there are empty arches where you can put the symbols from the previous releases. Skulls, swords, grim reaper etc.
I printed all this without supports, at 0.2mm layer height and 10% infill. I got some stringing in one of the torpedo tubes. Just clip it away with a clipper if it disturbes you. Or just prentend that a couple of wires are dangling there.
I asked one of my patrons to print one of the big models. My printer is not THAT big. That is why some of the images are a bit different. The print took 73 hours.
http://twitter.com/KruseMarkus
